Erbauer ERB108SDR, Instruction Manualtio

Page: 5 / 16

300W ORBITAL SANDER
ADDITIONAL SAFETY RULES - FOR ROTARY SANDERS
1. Never use this sander for wet sanding or liquid polishing. Failure to follow this rule
may result in risk of electrical shock.
2. Always wear eye protectors when using this sander.
3. Always wear a dust mask when using this sander.
4. Always inspect and remove all nails and screws etc from timber before sanding.
5. Always check walls and ceiling to avoid hidden power cables and pipes. A metal
detector can be obtained from any good DIY store for this purpose.
6. If possible, ensure the workpiece is firmly clamped to prevent movement.
7. Your sander is a hand held tool, do not clamp into a fixed position.
8. Never stop the sander by applying a force to the base plate.
9. Only use sanding paper in good condition. Do not use torn or worn sanding
paper.
10. Do not sand magnesium material due to the risk of fire.
11. Do not sand material including asbestos due to a health risk.
12. Do not sand lead based paint due to the risk of lead poisoning, test any paint work
with a lead paint test kit to confirm if lead paint is present.
13. Do not eat or drink in the working area of the sander.
14. Do not allow people to enter the working area without wearing a dust mask.
15. Where possible, seal off the working area to contain the dust for later removal.
Save these instructions. Refer to them frequently and use them to instruct others
who may use this tool. If someone borrows this tool, make sure they have these
instructions.
WARNING!
Some dust created by using power tools contains chemicals known
to cause cancer and birth defects or other reproductive harm. Some examples of
these chemicals are:
1) Lead from lead-based paint
2) Crystalline silica from bricks and cement and other masonry products
3) Arsenic and chromium from chemically-treated lumber
Your risk to these exposures varies, depending on how often you do this type of work.
To reduce your exposure to these chemicals:
1) Work in a well ventilated area
2) Work with approved safety equipment, such as those dust masks that are specifi-
cally designed to filter out microscopic particles.