Erbauer ERB108SDR, Instruction Manualtio

Page: 10 / 16

OPERATION INSTRUCTIONS
NOTE:
Before using the tool, read the
instruction book carefully.
1. CHANGING HOOK & LOOP SANDING
PAPER (See Fig A, B)
The sandpaper and sanding plate are provided
with a hook and loop attachment system to
allow quick and easy changing of the sanding
and polishing accessories. Firstly, remove any
dust or other objects from the hook and loop
on the sanding plate and sandpaper. As the
sandpaper has dust extraction holes you must
align these with the holes in the sanding plate,
otherwise the dust extraction will not function.
(See Fig A)
To remove the sandpaper, lift the edge of the
paper and pull off from the sanding plate. (See
Fig B)
2. DUST BAG (See FigC)
Your sander is equipped with a dust bag. To
attached insert the dust bag into the back of the
sander until it is secure.
Caution!
To prevent the possibility of sanding dust
or foreign bodies being thrown in to your face or
eyes, never attempt to use your sander without
the dust box/bag properly installed.
Empty dust bag regularly (See Fig D)
For more efficient operation, empty dust box or
dust bag every 5-10mins. This will permit the air
to flow through the bag better.
To empty the dust bag, remove it from the dust
extraction port, shake out dust. (See Fig D)
Fig A
6
Fig B
7
Fig C
Fig D