3
ULTRA-E-F
Specifications
Transmitter
Transducer
Description
Specifications
Liquid types
Virtually most any liquid containing less than 5% total suspended solids
(TSS) or aeration.
Suited Liquid temperature
Standard Temp. Transducer: -40 to 240F [-40 to 121
℃
]
High Temp. Transducer : -40 to 480F [-40 to 250
℃
] for Clamp-on
-40 to 300F [-40 to 150
℃
] for Insertion
Transducer to Transmitter
Cable distance
Shield cable, standard 6 meters, (opt) Lengths to 300 meters
Pipe size
M transducer: 40-1000mm pipe I.D; L transducer: 1000-4500mm; S&K
transducer: 20-50mm; Insertion transducer: 80-4500mm
Pipe material
All kind of steel and cast iron, PVC etc.
Description
Specifications
Principle of Measurement
Principle of Transit Time, DSP technology and MultiPulse Transducer
Technology
Power Requirements
100-240VAC 50/60Hz ±15% or 12-36VDC
Velocity
0.003 to 12 m/s, bi-directional
Outputs
Optional
All outputs are isolated from earth and system grounds.
Data storage function
4-20mA: 1000 ohm max, Accuracy: 0.1%
Frequency output: (From F.out), for flow rate or total flow
Relay output for total flow or alarm
RS485 (Modbus-RTU) output
Option: Wireless handheld operator, GPRS
Display
4 line×16 English letters LCD, it can display total flow, flow rate,
velocity and meter run status etc.
Units
Rate
Totalizer
User Configured (English and Metric)
Flow Rate and Velocity Display
Forward total; Reverse total; Net Total(difference between forward and
reverse flow)
Ambient Conditions
-40 to 131F [-40 to 55
℃
], 0-95% relative humidity, non-condensing
Enclosure
NEMA 4X [IP65]
261H×193W×80D mm
Accuracy Flow Rate
±1.0% of reading at rates >0.5 m/s
±0.005 m/s of reading at rates<0.5 m/s
Repeatability
0.2%
Responding Time
500ms display refresh, sampling cycle 7.5ms
Security
Keypad lock and system lock, access code enable
Approvals(option)
ATEX (Exd
Ⅱ
BT6) certified. (LCIE 09 ATEX 3088)
Other functions
Automatic record incident and functions of management of flow
Remember the state of the flow meter; Diagnosis