19
ULTRA-E-F
1
1
∨
ENTER
∨
∨
∨
MENU
ENTER
ENTER
ENTER
6.
Transducer type (The transmitter is available for various transducer types, for ULTRA-E-FB,
opt. S, M, L, ULTRA-E-FC is Plug-in type B45 )
7.
Transducer mounting methods (refer to
Part 2, W, V, Z
)
8.
For the ULTRA-E-FB, Clamp-on transducers, should conform to the transducers
spacing (two transducers installing distance) displayed in M25. Also user shall refer to
M91 and keep the value of M91 in the range of 97%-103% by adjusting the transducers
spacing.
In the order stated above, enter the above-mentioned parameters by the following keypad
shortcuts:
1.
Press
keys to enter Windows No.11, and enter the pipe outside diameter,
and then press the ENTER key.
2.
Press the
key to enter Window No.12, pipe wall thickness, and press ENTER key.
3.
Press the
key to enter Window No.14, press the
key, move the
∧
or
∨
key to
select pipe material, and press the
key.
4.
Press the
key to enter Window No.16, press the
key, move the
or
∨
key to
select liner material, and press the
key.
5.
Press the
key to enter Window No.20, press the ENTER key, move the
∧
or
∨
key to
select fluid type, press the
key.
6.
Press the
key to enter Window No. 23, press the
key, move the
∧
or
∨
key to
select transducer type, and press the
key.
7.
Press the
key to enter Window No.24, press the
key, move the
∧
or
key to
select transducer-mounting method, and press the ENTER key.
8.Press the
key to enter Window No.25, accurately install the transducer according to the
displayed transducer mounting spacing and the selected mounting method (Refer to Installing
the Transducers in Part 2).
9.
Press the
10.
Press the
0
1 keys to enter Window No.01 to display measurement result.
X X keys to directly enter Window No.XX to display Mxx contents,
where X is digital number on keypad.
∨
∨
∧
∨
∨
ENTER
ENTER
ENTER
ENTER
MENU
MENU