Manual_
Page 32
www.equip-info.net
6. Windows will ask you which port the printer will be used, choose USB001: (Virtual
printer port to USB). (Ref. Fig.10)
Fig. 10
12.0 Set up the HyperTerminal with USB to serial port
1. Make sure that HyperTerminal is installed in your system. If not, please go to Start,
Settings, and Control Panel. Double click Add/Remove Programs, choose Windows
Setup page, Communications, click Details button and enable HyperTerminal to install
the program to your Windows system.
2. Go to Start, Settings, Control Panel, double click System, and click on Device Manager.
Check which COM port is located by USB to serial port. (Ref. Fig.11)
Fig. 11