Equinox ESP-2 OPTO Serial Hub Installation and User Guide
23
4.14 Reinitializing the Hub
The Initialize operation resets all configurable values to their factory defaults,
including the IP address and password.
To reinitialize:
1. Click
Re-initialize
from the Main Menu.
2. Click the
Re-initialize
button.
After the reinitialization and reboot, the web interface will try to reconnect to the hub,
using the predefined IP address (192.1.1.1). If this fails, or if the web interface does not
return within 30 seconds, direct your browser to the predefined IP address (192.1.1.1).
You may also reinitialize the ESP-2 serial hub using the configuration utility (see
on page 30) or the INIT button on the front panel (see
