eQ-3 homematic IP HmIP-SCTH230, Installation Instructions And Operating Manual

Page: 49 / 55

49
Troubleshooting
If the duty cycle is exceeded, this is indicated by one long
red lighting of the device LED
(E) , and may manifest itself
in the device temporarily working incorrectly. The device
starts working correctly again after a short period (max.
1 hour).
7.3 Error codes and flashing sequences
Flashing code Meaning Solution
Short orange
flashing
Radio
transmission/
attempting to
transmit/
data transfer
Wait until the transmis-
sion is completed.
1x long green
lighting
Transmission
confirmed
You can continue
operation.
1x long red
lighting
Transmission
failed or duty
cycle limit is
reached
Please try again (see
sec. “7.1 Command not
confirmed” on page
48 or “7.2 Duty cycle”
on page 48).
Short orange
flashing (every
10 s)
Teach-in
mode active
Enter the last four
numbers of the
device serial number
to confirm (see “5.3
Teaching-in” on page
44).
6x long red
flashing
Device
defective
Have a look at your app
for error message or
contact your retailer.
1x orange
and 1x green
lighting
Test display Once the test display
has stopped, you can
continue.