Epson TM-T88V, Technical Reference Manual

Page: 41 / 158

Chapter 2 Setup
41
2
DIP Switch Bank 2
SW Function ON OFF
Initial
setting
2-1 Handshaking (BUSY condition) Receive buffer full
•
Offline
•
Receive buffer full
OFF
2-2
R e s e r v e d ( D o n o t c h a n g e
setting)
Fixed to OFF OFF
2-3
∼
2-4
Selects print density
See "Selecting the Print Density (DIP Switches
2-3/2-4)" on page 45 .
OFF
2-5
Sets the release condition of the
receive buffer BUSY state. (This
function is effective when DIP
Switch 1-2 is set to off.)
R e l e a s e s t h e B U S Y
s t a t e w h e n t h e
remaining capacity
of the receive buffer
reaches 138 bytes.
R e l e a s e s t h e B U S Y
s t a t e w h e n t h e
remaining capacity
of the receive buffer
reaches 256 bytes.
OFF
2-6
R e s e r v e d ( D o n o t c h a n g e
setting)
Fixed to OFF OFF
2-7 I/F pin 6 reset signal Enabled Disabled OFF
2-8 IF pin 25 reset signal Enabled Disabled OFF
• For DIP Switch 2-1 (BUSY condition), see also "Selecting the BUSY Status" on page 46 .
•
Do not change the setting of DIP switches 2-2 and 2-6. Otherwise, the printer may not
operate normally.