Epson TM-H6000IV-DT Technical Reference Manual Download Page 80

Page: 80 / 220

OS Initial Settings

The follow

ing

expla

he proced

res for se

tting

he OS whe

he power for

prod

for

he f

me.

Check that the product's power is not on, and connect the display and

keyboard.

Turn on the product. The login screen is displayed. Input the password.

The

initi

al se

tting

s are as follows.

The OS desktop is displayed. Select [Start], then [Control Panel], and

[Date and Time]. The "Date and Time" window are displayed. Set the

time, date, and the timezone.



When performing setup for the OS, you need a display and a keyboard.



Connect the display when this product is off.



If you connect the display when this product is on, data may not be properly displayed.

The display can use either the VGA or the DisplayPort. If you are using dual display,
perform separate settings.
For detail, refer to

"Settings for Dual Display" on page 120

User name

Password

Windows Embedded POSReady 7

EPSON-USER

H6000IV-DT

You can also set the date, time, and the timezone using EPSON TMNet WebConfig.

Summary of Contents for TM-H6000IV-DT





























































































































































































































Search results

Summary of Contents for TM-H6000IV-DT

Reviews:

Related manuals for TM-H6000IV-DT

Brands by name

Popular brands

Epson TM-H6000IV-DT, Technical Reference Manual

Search results

Summary of Contents for TM-H6000IV-DT

Reviews:

Related manuals for TM-H6000IV-DT

Brands by name

Popular brands