Epson TM-H6000IV-DT Technical Reference Manual Download Page 74

Page: 74 / 220

Connecting the AC Adapter

Use

he ded

ed AC adap

er for TM-H6000IV-DT prov

ded w

he pr

int

er.

Connecting the AC adapter

Make sure that the power to the printer is turned off and that the AC

adapter power cord is unplugged from the wall socket.

Connect the DC cable of the AC adapter to the DC-In.

Insert the AC Adapter power cord into a wall socket.

WARNING

Be sure to use the specified AC adapter [AC adapter,T (Model: M284A)].
Connection to an improper power source may cause fire.

Be sure to leave a space between the AC adapter and the main unit.

DC-In

Summary of Contents for TM-H6000IV-DT





























































































































































































































Search results

Summary of Contents for TM-H6000IV-DT

Reviews:

Related manuals for TM-H6000IV-DT

Brands by name

Popular brands

Epson TM-H6000IV-DT, Technical Reference Manual

Search results

Summary of Contents for TM-H6000IV-DT

Reviews:

Related manuals for TM-H6000IV-DT

Brands by name

Popular brands