Epson TM-290-II, Operator'S Manual

Page: 32 / 62

ESC 2
N a m e
Set 1/6 inch line spacing
F o r m a t
< 1 B >
H
< 32 >
H
Description
Sets the line spacing to 1/6 of an inch.
N o t e s
• The set values for Standard and Page Modes are inde-
pendent, and they are valid only in the corresponding mode.
ESC 3
n
N a m e
Set line spacing using minimum units
F o r m a t < 1 B >
H
< 3 3 >
H
<
n >
R a n g e
Description
Sets the line spacing to
n/60
inches.
N o t e s • The set values for Standard and Page Modes are
independent, and they are valid only in the corresponding
mode.
D e f a u l t
n = 10 (1/6 inch)
ESC @
N a m e
Initialize printer
F o r m a t < 1 B >
H
< 40 >
H
Description Clears the data in the print buffer and resets the printer
mode (the same state as when the power is turned on).
N o t e s • The DIP switches are not read again.
• The data in the receive buffer is not cleared.
ESC C
n
N a m e
Set cut sheet eject length
F o r m a t
< 1 B >
H
< 4 3 >
H
<
n >
R e n g e
Description Set the eject length for cut sheets to n lines.
• When
n =
0, no eject length will be set.
N o t e s • If the line spacing is changed after the eject length is set,
the eject length remains unchanged.
• The eject length set by this command is used only when
FF
(Form Feed) is executed.
- 2 7 -