E
Tape the end to the roll core.
Place tape (available from third-party suppliers)
at the center and then at the left and right ends.
F
Keep the
d
button in the control panel pressed
until you have fed enough paper for about three
wraps around the roll core.
G
Keep the Manual switch pressed to Backward to
wrap the paper three times around the core.
After wrapping the paper around the core,
ensure that paper around the core is sufficiently
loose.
H
Set the Auto switch to Backward.
Removing Paper from the Auto
Take-up Reel Unit
This section describes how to remove paper from the
auto take-up reel unit.
!
Caution:
Removing paper from the auto take-up reel unit
requires two workers, one on each end of the roll.
A single worker working by his- or herself could
drop the roll, resulting in injury.
Buttons that are used in the following settings
SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide
Basic Operations
43
