Cut Sheets
Cut sheets are automatically ejected to the rear,
where they can be removed by hand.
Poster Board
Poster board is partially ejected to the front.
Supporting the board with one hand to prevent it
falling, press the
Z
button and pull out the
board.
If the next job will not use poster board, lower all
the poster board supports. Leaving the supports
raised may cause paper to jam.
To lower the supports, grasp them as shown, pull
them diagonally downward, and then release.
D
Follow the on-screen instructions to load the
paper for the next job.
Using the Paper Basket
The paper basket collects paper from the printer,
preventing it falling to the floor and becoming creased
or dirty.
The optional Stand (24”) for the SC-T3000 Series comes
with a paper basket.
It can hold up to 20 sheets of the following types of paper
printed in line drawing mode.
Paper Size
Media types
A1 (594 × 841 mm)
Plain Paper Roll
US D (22 × 34 in)
A0 (841 × 1189 mm)
*
US E (34 × 44 in)
*
* Not supported by the SC-T3000 Series.
Paper not of the above types must be removed from the
printer one at a time before the next sheet is printed.
c
Important:
Collecting consecutive sheets of other types in the
paper basket may result in stains, folds, or other
damage to the printed sheets.
The paper basket can hold sheets up to 1189 mm long.
Note:
Close the paper basket before printing banners or other
documents that exceed the maximum length. Before the
paper ejected from the printer touches the floor, we
suggest that you take it in both hands close to the paper
eject guides and continue to lightly support it until
printing is complete.
Closing the Paper Basket
Close the paper basket before loading paper or moving
the printer.
SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide
Basic Operations
37
