29
Cutting Roll Paper Manually
You can keep your prints on the roll until you manually cut them.
Note:
The built-in cutter may not be able to cut some types of media. In addition, heavy or thick media
types may damage or dull the cutter, requiring more frequent replacement.
1.
Press the
paper source button.
2.
Press the down arrow button to select
Roll Paper/No Cut
, and press the
OK
button.
3.
Run your print job.
4.
Press the
paper cut button.
Note:
If the paper cannot be cut by the built-in cutter, press the
paper feed button until your print is
clear of the printer, then cut the print by hand.
Parent topic:
Printing Trim Lines
When you disable the Auto Cut setting, you can print a trim line (page line) between print jobs as a guide
for manual cutting.
1.
Before you print, press the
Menu
button.
2.
Press the down arrow button to select
Paper
and press the right arrow button.
3.
Select
Roll Paper Setup
and press the right arrow button.
4.
Select
Print Page Line
and press the right arrow button.
5.
Press the up or down arrow button to select
On
.
6.
Press the
OK
button to save the setting.
A check mark appears next to the setting.
7.
Press the
pause/cancel button to exit the menu.
8.
Run your print job.
Parent topic:
Related references
Summary of Contents for surecolor p5000
