Light status
Condition/solution
One of the following has occurred:
The
paper/cancel light is
flashing
• The printer cover is open. Close the printer cover.
• Paper or the CD/DVD tray is jammed. Remove the jammed paper.
• Printing was canceled while printing on thick paper, or on a CD or
DVD. Remove the paper or disc and press the
paper/cancel
button.
• The source selected in the printer driver does not match the paper
source. Change the paper source in the printer driver to match the
correct paper source and press the
paper/cancel button.
• A nozzle check was started without paper in the auto sheet feeder.
Load paper and press the
paper/cancel button.
An unrecoverable error has occurred. Turn the product off and then
The
paper/cancel and
back on again.
ink lights are flashing
simultaneously
One of the following has occurred:
The
paper/cancel and
ink lights are flashing
• The product's ink pads are at the end of their service life. Contact
alternately
Epson Support to obtain replacement pads. You cannot use the
product until the pads are replaced.
• The front manual feed tray is not in the correct position. When printing
on thick paper, or a CD or DVD, open the front manual feed tray and
position the paper or tray correctly.
Parent topic:
Solving Problems
Related references
Paper Feeding Problems
Paper Jam Problems - Sheet Feeder
Paper Jam Problems - Rear Manual Feed Tray
Paper Jam Problems - Thick Media or CD/DVD
Paper Jam Problems - Roll Paper
Where to Get Help
Related tasks
Using Ink Density Optimization
125