Epson Stylus Photo RX700 Series Service Manual Download Page 56

Page: 56 / 202

EPSON Stylus Photo RX700

Revision A

Troubleshooting

Overview

5 6

Scan to memory error (card removed)

The memory card or disk was removed. Operation canceled.

Displayed for a specified time
(approx. 3 seconds).

Scan to memory error (format failed)

An error has occurred during format.

Format error.

Displayed for a specified time
(approx. 3 seconds).

Scan to memory error (card removed)

Media was removed during format.

The memory card or disk was removed. Formatting is stopped.

Displayed for a specified time
(approx. 3 seconds).

Index sheet scan error (no index sheet) An index sheet was not set.

There is no Index Form or it is not placed correctly. Please check it and try again.

Displayed for a specified time
(approx. 3 seconds).

Index sheet scan error
(incorrect image selection marking)

No image is selected on the Index Form or is not marked correctly. Please check
it and try again.

Displayed for a specified time
(approx. 5 seconds).

Index sheet scan error
(incorrect paper selection marking)

Paper is not selected on the Index Form or ovals are not filled in correctly. Check
the Index Form and then try again.

Displayed for a specified time
(approx. 5 seconds).

Index sheet scan error
(discrepancy between index sheet and
card)

The contents of the memory card have changed. Print a new Index Form and try
again.

Displayed for a specified time
(approx. 5 seconds).

CDR/DVD guide open
(at startup initialization)

Displayed when the guide was open when printing started.
(at startup initialization)

The guide for CD/DVD print is opened. Close the guide.

The guide has been stored.

Name card long edge first insertion
error

A name card was fed long edge first and caused a jam.

Please insert paper and press the Color button.

The name card inserted in a
landscape direction has been ejected
with the procedures on the left.

Paper mismatch error

CD/DVD printing was attempted on a photo board, and vice
versa.

There is no CD/DVD tray. Please check it and press the Color button.

Paper that is in accordance with
print setting has been set.

CDR/DVD guide open

• Displayed when the guide was open when printing started.

(except for standalone printing)

• Displayed when the guide was opened during printing.

The guide for CD/DVD print is opened. Close the guide.

The guide has been stored.

CDR/DVD guide close

Displayed when the guide was closed when printing started.
(except for standalone printing)

The guide for CD/DVD print is closed. Open the guide and press start button.

The guide has been opened. Or, a
specified time has elapsed.

Table 3-1. Error List (continued)

Error Name

Occurrence Condition

Displayed Message

Release Condition

Summary of Contents for Stylus Photo RX700 Series











































































































































































































Search results

Summary of Contents for Stylus Photo RX700 Series

Reviews:

Related manuals for Stylus Photo RX700 Series

Brands by name

Popular brands

Epson Stylus Photo RX700 Series, Service Manual

Search results

Summary of Contents for Stylus Photo RX700 Series

Reviews:

Related manuals for Stylus Photo RX700 Series

Brands by name

Popular brands