82
2. Make sure that the document cover is closed, then open the scanner.
Caution:
Do not open the scanner when the document cover is open.
3. Press and release the
ink button. The
On
and
ink lights flash.
If one of the cartridges is low or empty, the Stylus CX moves that cartridge to the
ink out mark. Go to step 4.
If no cartridges are low or empty, the ink cartridge holder moves to the ink
replacement position. Go to step 5.
Note:
Do not hold down the
ink button for more than 3 seconds or the printer
will start to clean the print head.
Caution:
Do not move the print head by hand; this may damage the Stylus CX.
Always press the
ink button to move it.
4. Press the
ink button again.
■
If more than one cartridge is empty or low, the next cartridge moves to the
ink out mark.
Summary of Contents for Stylus CX4100 Series
Page 45: ...47 Home Mode ...
