Epson Stylus Color, Service Manual

Page: 29 / 151

EPSON Stylus Photo
Rev.A
1-21
1.4.2 Panel Functions
[Panel Functions]
Button Function
Load/Eject
(Pushing within 2 seconds)
•
Loads or Ejects the paper.
•
When carriage is on the Ink Cartridge change position, return carriage
from Ink Cartridge change position.
Load/Eject
(Pushing for 2 seconds)
•
Starts the Ink Cartridge change sequence.*
Moves the carriage to cartridge change position.
Cleaning
(Pushing for 2 seconds)
•
Starts the Cleaning of head.
•
In the condition of “Ink Low” or “Ink Out” or “No Ink Cartridge” starts the
Ink Cartridge change sequence.*
Cleaning
(Pushing within 2 seconds)
•
When carriage is on the Ink Cartridge change position, return carriage
from Ink Cartridge change position.
*This function is not available in printing status.
[Panel Functions with Power ON]
Button Function
Load/Eject
•
Starts status printings.**
Cleaning
•
Changes a Code Page.
Load/Eject
+
Cleaning
•
Enters the particular settings mode.(Factory use only.)
•
To enter the particular settings mode, it is necessary to push following
button while Paper Out LED is blinking.(It blinks about 5 seconds)
** status printings prints firmware version, ink counter, selected code page and nozzle check patterns.
[Particular setting mode]
Button Function
Load/Eject
(Pushing for 10 seconds)
•
Initialize EEPROM*** and reset timer IC.
*** Refer to EEPROM map.(Refer to EEPROM map in the Appendix)
Table 1-17. Panel Function
Table 1-18. Panel Function with Power On
Table 1-19. Particular Setting Mode