Epson Stylus Color 880, Service Manual

Page: 92 / 179

EPSON Stylus COLOR 880 Revision A
Disassembly and Assembly Disassembly Procedures 92
6) From the Middle Frame, remove two screws (No.1) securing the Pump
Assembly in the Ink System Assembly.
Then, from the Right Frame, remove one screw (No.1) securing the Cap
Assembly in the Ink System Assembly. Refer to Figure 4-15.
7) Release three hooks fixing the Cap Assembly to the Metal plate for Ink
System Assembly and remove the Cap Assembly.
Refer to Figure 4-15.
8) Remove the ink tube carefully from the Cap Assembly.
Figure 4-14. The Cleaner Head
Figure 4-15. Removing the Pump Assembly & Cap Assembly
C A U T I O N
1. When replacing the cleaner head built in the Pump
assembly, be careful of the following points.
„
Do not touch the cleaner head with your bare hands.
Use gloves or tweezers.
„
Do not smear the head cleaner with oil or grease.
„
Set the Cleaner Head into place as shown in Figure 4-
14.
2. When replacing the Cap Assembly, do not touch the
sealing rubber portion of the Cap Assembly.
3. The components parts of the Pump Assembly are no
individually supplied as ASP. So please replace the whole
Pump Assembly when the Pump Assembly needs
replacing.
Cleaner Head
Cap Assembly
side Frame
side
Cap Assembly
Three hooks fixing the
Cap Assy.
No.1 Screw securing
the Cap Assy.
No.1 Screws securing
the Pump Assembly
Middle Frame
Cleaner Head