Epson Stylus Color 880, Service Manual, Page: 146 / 179

EPSON Stylus COLOR 880 Revision A
Maintenance Overview 146
15
<Lubrication Point>
“CARRIAGE ASSEMBLY”
Apply grease with the syringe while
rotating the “SHAFT,CR,GUIDE”.
Move the “SHAFT,CR,GUIDE” to
the left and right to spread the
grease.
Verify that grease can be seen on
the outside of the bearing.
See page 150
<Lubrications Type> G-55
<Lubrication Amount>
0.05~ 0.07g
Note:
This is the amount to be applied to a
new “CARRIAGE ASSEMBLY”
16
<Lubrication Point>
Shaft for “FRAME, LEFT”
See page 150 <Lubricant Type> G-26
<Lubrication Amount>
φ
1 x 5mm
17
<Lubrication Point>
Inside of the right hole of “FRAME,
ASF; B”
Use a brush to apply grease.
See page 150 <Lubricant Type> G-26
<Lubrication Amount>
φ
1 x 1mm
Apply grease evenly to the inside of the
hole.
18
<Lubrication Point>
Left and right edges of “HOPPER
ASSEMBLY; C”
Use a brush to apply grease.
See page 151
<Lubricant Type> G-26
<Lubrication Amount>
2mm-diameter ball
Table 6-2. Lubrication Point (continued)
No. Standard Remarks
19
<Lubrication Point>
“GUIDE PLATE, CR” (the part where
the carriage slides on.)
See page 151
<Lubricant Type> G-26
<Lubrication Amount>
φ
1 x approx. 270mm
Table 6-2. Lubrication Point (continued)
No. Standard Remarks