Epson STYLUS COLOR 480, Service Manual

Page: 125 / 149

EPSON Stylus COLOR 480 Revision B
Maintenance Overview 125
Table 6-2. Lubrication Point
No. Lubrication Type/Point Remarks
1
<Lubrication Point>
• Inside the CR shaft hole of the CR unit.
Refer to Figure 6-4, "Lubrication point 1".
<Lubrication Type>
• G-55
<Lubrication Amount>
• Whole inside the CR shaft hole evenly.
40+/15mg x 2
• Do not attach the grease to other
portion of the CR unit.
• Use a syringe to apply it.
• Move the CR guide left and
right, smooth out the Geese on
the surface of the CR guide
shaft.
• After lubrication, make sure that
the carriage moves smoothly.
2
<Lubrication Point>
• Contact point between PF roller and the PF
grounding spring. Refer to Figure 6-5,
"Lubrication point 2".
<Lubrication Type>
• G-26
<Lubrication Point>
•
Φ1
mm x 5mm
• Do not attach the grease to the
paper path.
• Use a syringe to apply it.
3
<Lubrication Point>
• Shaft of the Pully driven shaft. Refer to
Figure 6-6, "Lubrication point 3".
<Lubrication Type>
• G-26
<Lubrication Amount>
Φ
1mm x 1mm
• Use a syringe to apply it.
4
<Lubrication Point>
• Inside the sliding slot for ASF Hopper on
the ASF Frame.Refer to Figure 6-7,
"Lubrication point 4".
<Lubrication Type>
• G-26
<Lubrication Amount>
•
Φ
1mm x 4points
• Use a syringe to apply it.
• After lubrication, move the ASF
hopper manually and smooth out
the grease inside the ASF frame.
5
<Lubrication Point>
• Specified both edges area on the Front
frame. Refer to Figure 6-8, "Lubrication
point 5".
<Lubrication Type>
• G-26
<Lubrication Amount>
•
Φ
1mm x 40mm x 2 areas
• Use a syringe to apply it.
• After lubrication, move the CR
unit left or right and smooth out
the grease on the Front frame.
6
<Lubrication Point>
• Between the Cam parts on the LD roller
shaft and the ASF Hopper. Refer to Figure
6-9, "Lubrication point 6".
<Lubrication Type>
• G-26
<Lubrication Amount>
•
Φ
1mm x 1mm
• The Cam parts on the LD roller
shaft must touch the G-26
lubricated on the ASF hopper in
the LD roller shaft rotation.
7
<Lubrication Point>
• Surface of the shaft on the Spur gear 15, EJ
at the Pump unit side. Refer to Figure 6-10,
"Lubrication point 7".
<Lubrication Type>
• G-26
<Lubrication Amount>
•
Φ
1mm x 1mm
Table 6-2. Lubrication Point
No. Lubrication Type/Point Remarks