Epson Stylus 800 Series, User Manual

Page: 61 / 102

The text an extra blank line between each text line.
Set auto line feed to off in the default-settings mode so that two
line-feed signals are not sent. See “Using the Default-Settings
Mode” in Chapter
Line spacing is incorrect. Adjust the line-space setting with
your software.
Printed is not as
The page length setting may not match the length of the paper
loaded in the printer. Change the page length setting within
your software to match to the paper you are using.
Paper handling
The printer does not print; the
Paper
light is on and the printer
beeps three times.
No paper is loaded in the printer. Load paper in the paper
feeder or from the manual feed slot.
Single sheets do not feed properly from the paper feeder.
Too many sheets are loaded in the paper feeder. Remove the
paper from the paper feeder and reload up to sheets.
The paper is too thick or too thin to be fed. Make sure that the
paper you are using meets the specifications. Some paper types
require manual feeding. See “Technical Specifications” in the
Appendix.
The printer loads more than one sheet at a time.
The paper is too thin. Make sure that the paper you are using
meets the specifications. Some paper types require manual
feeding. See “Technical Specifications” in the Appendix.
3-10 Maintenance and Troubleshooting