Epson Stylus 800 Series User Manual Download Page 15

Page: 15 / 102

Except as specifically explained in the user’s manual, do not

attempt to repair the printer yourself. Opening or removing

those covers that are marked “Do Not Remove” may

expose you to dangerous voltage points or other risks. Refer

all servicing in those compartments to service personnel.

Unplug this printer from the wall outlet and have it

repaired by a qualified service person under the following

conditions:

A. When the power cord or plug is damaged or frayed.

If liquid has been spilled into it.

If it has been exposed to rain or water.

If it does not operate normally when the operating

instructions are followed. Adjust only those controls

that are covered by the operating instructions since

improper adjustment of other controls may result in

damage and will often require extensive work by a

qualified technician to restore the printer to normal

operation.

If it has been dropped or the cabinet has been damaged.

If it exhibits a distinct change in performance,

indicating a need for service.

Summary of Contents for Stylus 800 Series







































































































Search results

Summary of Contents for Stylus 800 Series

Reviews:

Related manuals for Stylus 800 Series

Brands by name

Popular brands

Epson Stylus 800 Series, User Manual

Search results

Summary of Contents for Stylus 800 Series

Reviews:

Related manuals for Stylus 800 Series

Brands by name

Popular brands