Lift the cartridge out of the printer and dispose of it
properly. Do not take the used cartridge apart or try to refill
it.
q
If
ink does get on
your
hands, wash them thoroughly with soap
and water.
ink gets
into
your
them
with water.
to page
and follow the steps there to install the
new cartridge.
Note:
When you replace the cartridge, the printer will not recharge the
ink
again. However, the print head may start moving as
the
performs
normal maintenance
procedures.
This can take
up to seconds to complete.
Cleaning the Print Head
If print quality diminishes, use the printer’s built-in print-head
cleaning cycle to ensure that the nozzles are delivering ink
properly. To avoid wasting ink, clean the print head only if
print quality declines.
Follow these steps:
Make sure the printer is
on and the
Pause
light is
on. If the
Pause
light is not on, press the
Pause
button to
pause the printer.
Hold down the
button and press the
Pause
button for
two seconds.
The cleaning cycle takes about seconds. The
Pause
light
flashes throughout the cycle and then stays on when the
cleaning cycle is finished.
Press the
Pause
button to resume printing.
Maintenance and Troubleshooting 3-3
Summary of Contents for Stylus 800 Series
Page 1: ...U S E R S G U I D E 3 Stylus 800 400282000DO 101 00 ...
Page 6: ...Bit image A 20 Graphics A 21 Character Tables A 21 Glossary Index ...
Page 73: ......
Page 88: ...i ...
