Epson Stylus 800 Series, User Manual

Page: 43 / 102

Note:
The printer has a minimum and maximum loading position.
you try to move the loading position beyond these limits, the
printer beeps and the paper stops moving.
When the paper reaches
loading position, the
printer beeps. Use setting as a reference point
the loading position.
Adjusting the print position
The print position is the position on the page where the print
head actually prints during a print job. If you want to change
the current print position, you can use the micro-feed feature as
follows:
Press the
Pause
button to stop printing; the
Pause
light
comes on.
Hold down the button and press the
Economy/
Condensed
(up) or
Font
(down) button to adjust the print
position on the page.
Press the
Pause
button again to resume printing. (You may
have to experiment a few times to get the results you want.)
Note:
The has a limit mm inch) to the you
can move the print position backwards using micro Feeding
stops when reach this limit.
2-10 Using Other Printer Functions