manualshive.com logo in svg

Epson SC-P7500 Series, User Manual

Share
Download
Epson SC-P7500 Series User Manual Download Page 41

A

Set the auto take-up reel unit Auto switch to Off.
Plug the power cord into an outlet and confirm
that the power lamp lights.

B

Turn on the printer.

C

Check that the roll paper is correctly loaded in the
printer.

D

Select Paper loading information - 

Prepare for

Take-up

 on the printer's control panel.

The paper is fed to the roll core.

E

Tape the end to the roll core.

Place tape (available from third-party suppliers)
at the center and then at the left and right ends.

F

Flip the Manual switch on the auto take-up reel
unit to Backward, and take up as much paper as
possible.

After wrapping the paper around the core,
ensure that paper around the core is sufficiently
loose.

G

Set the Auto switch to Backward.

Removing Paper from the Auto 
Take-up Reel Unit

This section describes how to remove paper from the
auto take-up reel unit.

SC-P9500 Series/SC-P7500 Series     User's Guide

Basic Operations

 

41

Summary of Contents for SC-P7500 Series
























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands