Settings item
Setting/Additional Explanation
PS3 Menu (This item is only displayed when the PS option is connected.)
Version
Displays the PostScript/PDF version.
Output Size
Auto, A Series, US-ANSI, US-ARCH, B Series (ISO), B Series (JIS), Photo Series,
Others, User-Defined
Margin Options
Standard, Add Margins, Clip By Margins
Select the difference between the size of the print data and the size of the
output paper.
Quality
Draft, Standard, Fine
Color Mode
Color, B&W
Only displayed when a paper type that supports color printing and
monochrome printing is selected.
CMYK Simulation
You can select the CMYK ink color you want to simulate when reproducing
CMYK ink colors for an offset printer.
RGB Source
When printing RGB data, you can select the RGB color definition you want
to simulate.
Rendering Intent
You can select how to convert color spaces during Absolute Colorimetric,
Relative Colorimetric, Perceptual, Saturation CMYK simulations and RGM
simulations.
Black Point Compensation
On, Off
Normally, select On. Select "Off" if you notice that shadows are too bright
when converting from a wide color space to a narrow color space.
Auto Rotate
On, Off
When this is set to "On", the print data is automatically rotated 90 degrees
to the right depending on conditions such as the paper width and data
size.
Caching To HDD
On, Off
Normally, select Off. Set this to On if the print head stops frequently while
printing. This may solve the problem.
Save To HDD
Print And Save, Print Only, Save Only
PS Error Sheet
On, Off
When this is set to On, the contents of the error are printed when a
PostScript error occurs.
Optimize Edge Quality
On, Off
When this is set to On, everything is printed in single head mode. The print
quality at the edges is improved, but the print speed is reduced and the
margin at the leading edge is increased by about 35 mm compared to
when this is set to Off.
When this is set to Off, everything is printed in dual head mode. Select On if
you are worried about the print quality at the leading edge of the paper.
PDF Rendering Level
Level 1 - 5
Normally, this is set to 5. Although this may create a PS that reproduces the
PDF as faithfully as possible, you may not be able to print. If this occurs, try
lowering the rendering level.
Clear All Settings
Restores the PS settings to their default settings.
SC-P9500 Series/SC-P7500 Series User's Guide
Menu List
110
