manualshive.com logo in svg

Epson S5U1C62000A, Manual

The Epson S5U1C62000A user manual is available for free download on our website. This comprehensive manual provides detailed instructions and guidelines, ensuring a seamless setup and optimal usage of your Epson device. Download the manual from manualshive.com to maximize the full potential of your Epson S5U1C62000A.

Share
Download
background image

S5U1C62000A MANUAL

EPSON

71

(S1C60/62 FAMILY ASSEMBLER PACKAGE)

CHAPTER 5: ASSEMBLER

5.7.5 Section Defining Pseudo-Instructions (.code, .bss)

The section defining pseudo-instructions define one related group of codes or data and make it possible
to reallocate by the groups at the later linking stage. Even if these section defining pseudo-instructions
are not used, the section kind will be automatically judged by its contents and causes no error. If the new
codes or data without section definition are different from the previous code or data kind, they will be
taken as another new section.

.code pseudo-instruction

Instruction format

.code

Function

Declares the start of a CODE section. Statements following this instruction are assembled as those to
be mapped in the program ROM, until another section is declared.
The CODE section is set by default in the assembler. Therefore, the .code pseudo-instruction can be
omitted at top of a source file. Always describe it when you change a section to a CODE section.

Precautions

  • A CODE section can be divided among multiple locations of a source file for purpose of definition

(describing the .code pseudo-instruction in the respective start positions).

  • Sections are relocatable by default unless those locations are specified with the .org, .page or .bank

pseudo-instructions, or more loosely with the .align pseudo-instruction.

.bss pseudo-instruction

Instruction format

.bss

Function

Declares the start of a BSS section. Statements following this instruction are assembled as those to be
mapped in the RAM, until another section is declared.

Precautions

  • In a BSS section, nothing else other than the .comm, .lcomm, and .org pseudo-instructions, symbols,

and comments can be described.

  • A BSS section can be divided among multiple locations of a source file for purpose of definition

(describing the .bss pseudo-instruction in the respective start positions).

  • A BSS section is relocatable by default unless its address is specified with the .org pseudo-instruction.

It is possible to specify absolute locations for CODE sections by page number with the .page pseudo-
instruction or by bank number with  the .bank pseudo-instruction, or by 2

n

 words alignment with the

.align

 pseudo-instruction, but only the .org and .align pseudo-instructions are applicable to BSS

sections to define completely absolute location.

Summary of Contents for S5U1C62000A
































































































































































































































































Reviews:

No comments

Related manuals for S5U1C62000A

Lanner NCA-4035 User Manual preview
NCA-4035
Brand: Lanner Pages: 109
Renesas Compact Emulator M30620T-CPE User Manual preview
Compact Emulator M30620T-CPE
Brand: Renesas Pages: 52
C&T Solution RCO-3000 Series User Manual preview
RCO-3000 Series
Brand: C&T Solution Pages: 96
Ubiquiti PBE-5AC-300-ISO Quick Start Manual preview
PBE-5AC-300-ISO
Brand: Ubiquiti Pages: 28
National Instruments NI-9206 Getting Started preview
NI-9206
Brand: National Instruments Pages: 8
Z-Wave RAZBERRY 7 PRO Quick Start Manual preview
RAZBERRY 7 PRO
Brand: Z-Wave Pages: 6
ICP DAS USA USB-87P1 User Manual preview
USB-87P1
Brand: ICP DAS USA Pages: 62
Glacier G2080TiFE Installation Manual preview
G2080TiFE
Brand: Glacier Pages: 2
SSV Embedded Systems eSOM/3517 Hardware Reference Manual preview
eSOM/3517
Brand: SSV Embedded Systems Pages: 17
Kontron CP3002-RA User Manual preview
CP3002-RA
Brand: Kontron Pages: 98
ekwb EK-FC750 GTX Series Installation Manual preview
EK-FC750 GTX Series
Brand: ekwb Pages: 2
Alesis QuadraVerb 2 Setting Up preview
QuadraVerb 2
Brand: Alesis Pages: 11
NXP Semiconductors MSC8113 Reference Manual preview
MSC8113
Brand: NXP Semiconductors Pages: 1202
Dolby Laboratories Digital Loudspeaker Brochure preview
Digital Loudspeaker
Brand: Dolby Laboratories Pages: 4
Delta AH10EN-5A Series Operation Manual preview
AH10EN-5A Series
Brand: Delta Pages: 132
Ross ULTRIX-FM-NS-1RU Install Manual preview
ULTRIX-FM-NS-1RU
Brand: Ross Pages: 5
SIIG US2273 Quick Installation Manual preview
US2273
Brand: SIIG Pages: 8
Idis DR-8416 Quick Manual preview
DR-8416
Brand: Idis Pages: 40

Brands by name

Popular brands

Load more brands