manualshive.com logo in svg

Epson S5U1C62000A, Manual

The Epson S5U1C62000A user manual is available for free download on our website. This comprehensive manual provides detailed instructions and guidelines, ensuring a seamless setup and optimal usage of your Epson device. Download the manual from manualshive.com to maximize the full potential of your Epson S5U1C62000A.

Share
Download
background image

S5U1C62000A MANUAL

EPSON

99

(S1C60/62 FAMILY ASSEMBLER PACKAGE)

CHAPTER 6: LINKER

6.9 Cross Reference File

The cross reference file enumerates all the address labels with their absolute addresses and all the ad-
dresses where the address labels are referred to. It is delivered only when the -x option is specified. Its file
format is a text file, and the file name is <file name>.xrf. (The <file name> is the same as that of the
output object file.)

Sample cross reference file

Linker 62 ver x.xx Cross reference file "TEST.XRF" Sun May 03 14:16:16 1998

Label "RAM_BLK1" at 0x000  "MAIN.O"  BSS, Global

0x0200  "SUB.O"  CODE
0x0202  "SUB.O"  CODE
0x0206  "SUB.O"  CODE
0x0208  "SUB.O"  CODE

Label "BOOT" at 0x0100  "MAIN.O"  CODE, Local

Label "LOOP" at 0x0106  "MAIN.O"  CODE, Local

0x0108  "MAIN.O"  CODE

Label "INIT_RAM_BLK1" at 0x0200  "SUB.O"  CODE, Global

0x0105  "MAIN.O"  CODE

Label "INC_RAM_BLK1" at 0x0206  "SUB.O"  CODE, Global

0x0107  "MAIN.O"  CODE

Contents of cross reference file

The format of each label information is as follows:

Label information

Address   File name  Type
      :                :

Label information

Indicates the following information:
• Label name
• Defined address
• Object file in which the label is defined.
• Section type
• Scope

Address

Indicates the address where the label is referred.

File

Indicates the object file in which the label is referred.

Type

Indicates the type of section that contains the address where the label is referred.

Summary of Contents for S5U1C62000A
































































































































































































































































Reviews:

No comments

Related manuals for S5U1C62000A

National Instruments NI 5922 Calibration Procedure preview
NI 5922
Brand: National Instruments Pages: 28
National Instruments NI 9219 Getting Started preview
NI 9219
Brand: National Instruments Pages: 19
National Instruments NI 6711 User Manual preview
NI 6711
Brand: National Instruments Pages: 103
National Instruments NI PXI-1042 Series Installation Manual preview
NI PXI-1042 Series
Brand: National Instruments Pages: 12
National Instruments PCI-1407 Setup And Operation preview
PCI-1407
Brand: National Instruments Pages: 4
ebm-papst 4112 N/2HU Operating Manual preview
4112 N/2HU
Brand: ebm-papst Pages: 6
ebm-papst 4314 N/2HHPU Operating Manual preview
4314 N/2HHPU
Brand: ebm-papst Pages: 6
ebm-papst 8312 L Operating Manual preview
8312 L
Brand: ebm-papst Pages: 5
Intel Optane M Series Installation And User Manual preview
Optane M Series
Brand: Intel Pages: 59
DAD DPX2060 User Manual preview
DPX2060
Brand: DAD Pages: 32
RAK RAK3372 Quick Start Manual preview
RAK3372
Brand: RAK Pages: 30
S&T kontron COMe-cEL6 User Manual preview
kontron COMe-cEL6
Brand: S&T Pages: 99
Avaya PARTNER PC CARD Installation Instructions preview
PARTNER PC CARD
Brand: Avaya Pages: 4
Blackmagicdesign Teranex 2D Processor Installation And Operation Manual preview
Teranex 2D Processor
Brand: Blackmagicdesign Pages: 969
Aurora EGO AE120 User Manual preview
EGO AE120
Brand: Aurora Pages: 6
Gundermann VIDEOWALL LEDWALL Optimizer HQ P2 Manual preview
LEDWALL Optimizer HQ P2
Brand: Gundermann VIDEOWALL Pages: 12
Thermaltake Extreme Spirit Il Instruction preview
Extreme Spirit Il
Brand: Thermaltake Pages: 2
Rockwell Automation Trusted T8833 Manual preview
Trusted T8833
Brand: Rockwell Automation Pages: 21

Brands by name

Popular brands

Load more brands