manualshive.com logo in svg

Epson S5U1C33001H1400, Manual

Share
Download
Epson S5U1C33001H1400 Manual Download Page 12

3. COMPONENTS INCLUDED WITH PACKAGE 

 

S1C33 Family In-Circuit Debugger

 

EPSON 7 

S5U1C33001H1400 Manual (Rev. 0.20)

 

3. COMPONENTS INCLUDED WITH PACKAGE 

The following shows the components included with the package: 

(1) S5U1C33001H1400 (main unit) .................................................................................................................1 

(2) USB cable (mini B).....................................................................................................................................1 

(3)  Target system interface cable (10-4 pin).....................................................................................................1 

(4)  Target system interface cable (10-10 pin)...................................................................................................1 

(5)  Target system power supply cable (4-4 pin) ...............................................................................................1 

(6)  Target system interface connectors (10-pin)...............................................................................................1 

(7)  Target system interface connectors (4-pin).................................................................................................1 

(8)  Target system power supply connectors (4-pin) .........................................................................................1 

(9) User registration card ............................................................................................ English/Japanese, 1 each 

(10) Warranty card........................................................................................................ English/Japanese, 1 each 

(11) Usage precautions ................................................................................................. English/Japanese, 1 each 

(12) Manual download guide........................................................................................ English/Japanese, 1 each 

The items specified below are not included with the package. These items must be prepared separately. 

(13) S5U1C33001H1400 User Manual (ICD33V6.0)

 

(PDF is downloadable from this PDF document and the SEIKO EPSON HP) 

(14) Debugger (gdb.exe) for the S1C33 Family (included in the S1C33 Family C Compiler Package) 

(15) Debugger manual for the S1C33 Family (included in the S1C33 Family C Compiler Package) 

Summary of Contents for S5U1C33001H1400




















































Reviews:

No comments

Brands by name

Popular brands

Load more brands