Epson RX580 - Stylus Photo Color Inkjet, Service Manual

Page: 85 / 107

EPSON Stylus PHOTO RX560/580/590 Revision A
Adjustment Scanner Home Position Adjustment 85
5.4.2 Home Position Adjustment Procedure
1. Connect the Stylus PHOTO RX560/580/590 to the PC with the USB cable, turn
the power on, and set the home position adjustment tool.
2. Run the adjustment program. Upon start, the “Select Parameter Set” window will
open.
(See Figure 5-14)
Select “Guinness” and click [OK].
3. When the window shown in the figure is displayed, click the “SGL” icon on the
toolbar.
(See Figure 5-15)
4. When the window shown in the figure is displayed, click the [Execute] button to
run the program.
(See Figure 5-16)
5. On completion of writing, the check screen appears. Confirm that “TEST OK” is
displayed on the top line. If “TEST OK” is not displayed, make the adjustment
again.
(See Figure 5-17)
Figure 5-14. Parameter Setting
Figure 5-15. Single Test Dialog Display
Figure 5-16. Execution of Home Position Adjustment
Figure 5-17. OK Screen
C H E C K
P O I N T
Place the home position adjustment tool in close contact with the
upper left corner of the document table. Leave the top cover of the
scanner open.
C H E C K
P O I N T
After adjustment, perform “Home Position Confirmation” and
make certain that the adjusted values have been written in
EEPROM.
Home position
adjustment tool
In close contact
with the upper
left corner
Select the model name
(Guinness) and click
the [OK] button
(Selection from here is also possible)
“SGL” icon
Select “Guinness” and click
[Execute]
TEST OK