Epson RX580 - Stylus Photo Color Inkjet, Service Manual

Page: 79 / 107

EPSON Stylus PHOTO RX560/580/590 Revision A
Adjustment Banding Reduction System (BRS) Adjustment / Paper Feed Profile Correction (PFP) 79
5.3.2 Adjustment Procedure
5.3.2.1 BRS adjustment
†
Printing the BRS adjustment pattern
1.
Set an A4 sheet of Matte Paper-Heavyweight on the paper support.
2.
Select “BRS adjustment” on the adjustment program.
3.
Print the adjustment pattern by clicking the [Print] button of “1. Print the
adjustment pattern”.
4.
Wait for more than five minutes to dry the printed pattern.
Figure 5-7. BRS Adjustment Pattern
C H E C K
P O I N T
„
The adjustment program, using the unit identification code,
judges whether the printer for which the correction value is
registered is the same one that was used to print the adjustment
pattern.
„
When a scanner with a CIS system is to be used to read the
adjustment pattern, wait for more than five minutes to dry the
printed pattern and then start scanning.
When a scanner with a CCD system is to be used, the printed
pattern can be read without waiting for drying after printing.
(
See Table 5-4. Specified Scanner for BRS/PFP Adjustment (p.
77) )
Unit identification code