Epson Runsense SF-810 User Manual Download Page 93

Page: 93 / 132

Measure set. table

Setting items

Value

Explanation

Activity Type

Run (default)

Set when running or jogging.

Walk

Set when walking (exercising at a slow pace).

Bike

Set when performing exercises that do not require you to
swing your arms, such as riding a bike.

Mode

Chronograph (default)

Set the mode to suit the measurements you want to
make.

Chronograph mode allows you to measure split times
and lap times (section measurement) simultaneously.

“Measuring Time, Distance, and Speed

(Chronograph Function)” on page 40

Interval mode allows you to switch the sets of hard
(sprint) or light (recovery) exercises, and repeat using the
specific distance or time set in advance.

“Setting a Time and Distance for Hard and Light

Workouts (Interval Function)” on page 45

Goal mode measures until the time or distance set in
advance is reached.

“Measure until the Time or Distance Set in Advance Is

Reached (Goal Function)” on page 52

Interval

Goal

AT Lap

SETTING 01 to 05

When a time or distance set in advance is reached, this
function records laps automatically.

Set the lap time or distance.

You can set five times or distances within the following
range.

Time: 01'00" to 60'00" (in increments of 1 minute)

Distance: 0.1 to 10.0 km (in increments of 0.1 km)

“Recording Laps Automatically (AT Lap Function)”

on page 56

OFF (default)

AT Pause

This function automatically stops measuring when you
stop running, and resumes when you continue running.

“Automatically Start/Stop Measuring (AT Pause

Function)” on page 58

OFF (default)

SF-810 User Manual

Settings

Summary of Contents for Runsense SF-810




































































































































Search results

Summary of Contents for Runsense SF-810

Reviews:

Related manuals for Runsense SF-810

Brands by name

Popular brands

Epson Runsense SF-810, User Manual

Search results

Summary of Contents for Runsense SF-810

Reviews:

Related manuals for Runsense SF-810

Brands by name

Popular brands