Epson Runsense SF-810 User Manual Download

Page: 25 / 132

After placing the device into the bottom of the cradle, push carefully on the top of the device until it is fixed in
place.

Important:

Make sure the device is placed in the correct direction; otherwise, the device or the cradle could be damaged.

When the device is placed in the correct direction, the alarm sounds, the following screen is displayed, and
charging starts.

Although the average time necessary for a full charge is

2.5 to 3.5 hours

, this varies depending on the situation.

Check that charging is complete.

When the following charging icon is displayed, charging is complete.

Note:

When the battery icon displays 100%, an over-charge prevention function is activated. The device will not be damaged
even if you continue to charge the battery.

SF-810 User Manual

Preparing and Basic Operations

Summary of Contents for Runsense SF-810




































































































































Search results

Summary of Contents for Runsense SF-810

Reviews:

Related manuals for Runsense SF-810

Brands by name

Popular brands

Epson Runsense SF-810, User Manual

Search results

Summary of Contents for Runsense SF-810

Reviews:

Related manuals for Runsense SF-810

Brands by name

Popular brands