Charging
Before use
c
Important:
❏
Make sure you use the cradle that came with this product.
❏
Do not place the device in the cradle if it is wet from water or sweat.
Otherwise the contact points on the cradle and the device could corrode, malfunction, or cause a
communication failure.
❏
Do not perform button operations when it is wet; otherwise, a malfunction could occur.
If the device is wet from water or sweat, use a little running water to wash the contact points and sensor, wipe away most
of the water with a towel and so on, and then let it dry naturally before placing it in the cradle.
Contact points/Sensor
Use low pressure water to wash the device.
See the following for more details about daily maintenance.
U
“Looking after your device” on page 114
SF-810 User Manual
Preparing and Basic Operations
23