Starting measuring
At the Measurement screen, press the
START/STOP
button to start the measuring.
c
Important
❏
The oldest data will be overwritten when the
device runs out of storage space used for
measurement data. We recommend that you
use the Epson View companion application to
upload data after each measuring.
U
“Managing data with the companion
application” on page 55
❏
The maximum measurement time for each
split lap is 13 hours. If these times are
exceeded, measuring is stopped.
❏
The maximum number of measuring sessions
is 64.
Pausing and resuming
measuring
You can pause the measuring by pressing the
START/
STOP
button during the measuring. You can then
resume the measuring by pressing the
START/STOP
button again.
Note
The device will return to the Time screen after one hour
of no operation before measuring is started or during
paused measuring. The data for the paused measuring
up to the point of the pause will be saved.
Stopping and saving measuring
A
Display the Stop menu
Press the
ENTER
button while the measuring is
paused to display the Stop menu.
B
Save the data
Press the
UP
or
DOWN
button > select
Save
>
and then press the
ENTER
button.
The Measurement Results screen appears with
the following information.
❏
Activity type and date
❏
Measurement time
❏
Distance
❏
Split time
❏
Average pace
❏
Average stride
❏
Calories burnt
❏
Steps
❏
Total number of laps
Use the
UP
and
DOWN
buttons to change
through the different displays./
Note
Select
Delete
if you do not want to save the data.
To resume the measuring, select
Resume
or press
the
START/STOP
button.
You can return to the Time screen by waiting 15
seconds or pressing the
ENTER
button.
J-57 User Manual
Measuring Your Workout
34