Epson Pro L1060U User Manual Download

Page: 12 / 315

Introduction to Your Projector

Refer to these sections to learn more about your projector and this manual.

Projector Features
Notations Used in the Documentation
Where to Go for Additional Information
Projector Part Locations

Projector Features

Your projector includes these special features:

Bright, high-resolution projection system

• Pro L1060U/L1060UNL/L1060W/L1060WNL: Up to 6000 lumens of brightness (white light output and

color light output)

Pro L1070U/L1070UNL/L1070W/L1070WNL/L1075U/L1075UNL: Up to 7000 lumens of brightness
(white light output and color light output)

Note:

Color brightness (color light output) and white brightness (white light output) will vary depending

on usage conditions. Color light output measured in accordance with IDMS 15.4; white light output
measured in accordance with ISO 21118.

• Pro L1060W/L1060WNL/L1070W/L1070WNL: Native resolution of 1200 × 800 pixels (WXGA)

Pro L1060U/L1060UNL/L1070U/L1070UNL/L1075U/L1075UNL: Native resolution of 1920 × 1200
pixels (WUXGA)

• 4K enhancement (Pro L1060U/L1060UNL/L1070U/L1070UNL/L1075U/L1075UNL)

Flexible connectivity

• Wired and wireless (optional) network support for projection, monitoring, and control via remote

network computer

• Variety of connection methods for a computer or video device including HDMI, BNC, DVI-D, and

HDBaseT

• Ports for connecting an external monitor and external speakers

Easy-to-use setup and operation features

• Interchangeable bayonet lens options available

Summary of Contents for Pro L1060U




























































































































































































































































































































Search results

Summary of Contents for Pro L1060U

Reviews:

Related manuals for Pro L1060U

Brands by name

Popular brands

Epson Pro L1060U, User Manual

Search results

Summary of Contents for Pro L1060U

Reviews:

Related manuals for Pro L1060U

Brands by name

Popular brands