Epson Pro L1060U User Manual Download

Page: 19 / 315

Notations Used in the Documentation

Follow the guidelines in these notations as you read your documentation:

•

Warnings

must be followed carefully to avoid bodily injury.

•

Cautions

must be observed to avoid damage to your equipment.

•

Notes

contain important information about your projector.

•

Tips

contain additional projection information.

Parent topic:

Introduction to Your Projector

Where to Go for Additional Information

Need quick help on using your projector? Here's where to look for help:

• Built-in help system

Press the

Home

button on the remote control or projector, select

Help

, and press

Enter

to get quick

solutions to common problems.

•

epson.com/support

(U.S.),

epson.ca/support

(Canada), or

epson.com.jm/support

(Caribbean)

View FAQs (frequently asked questions) and e-mail your questions to Epson technical support 24
hours a day.

• If you still need help after checking this manual and any other sources listed here, you can use the

Epson PrivateLine Support service to get help fast. For details, see "Where to Get Help."

Parent topic:

Introduction to Your Projector

Related references

Where to Get Help

Related tasks

Using the Projector Help Displays

Projector Part Locations

Check the projector part illustrations to learn about the parts on your projector.

Projector Parts - Front/Top
Projector Parts - Rear
Projector Parts - Interface Ports
Projector Parts - Base

Summary of Contents for Pro L1060U




























































































































































































































































































































Search results

Summary of Contents for Pro L1060U

Reviews:

Related manuals for Pro L1060U

Brands by name

Popular brands

Epson Pro L1060U, User Manual

Search results

Summary of Contents for Pro L1060U

Reviews:

Related manuals for Pro L1060U

Brands by name

Popular brands