manualshive.com logo in svg

Epson PR9, User Manual

The Epson PR9 User Manual is a comprehensive guide to help you maximize the potential of your PR9 printer. This manual covers everything from initial setup to advanced troubleshooting techniques. It's available for free download on our website, making it easy to access and refer to at any time.

Share
Download
background image

III

TABLE OF CONTENTS

Preface

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . XII

About this manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . XII

1. Getting started

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

1.1

Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

1.1.1 Delivery contents Printer 

PR 9

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

1.2

Requirements to the location of the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

1.3

A first look at the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

1.3.1 Front  view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
1.3.2 Rear  view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

1.4

Remove  transport  lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4

1.5

Ribbon installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5

1.6

Mains connection and power on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7

1.7

Print  test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-9

1.7.1 Selftest . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-9
1.7.1 Selftest printing contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-10
1.7.3 Dr. Grauert (print a letter) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-11

1.8

Connection to the system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-12

1.8.1 Parallel / Serial Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-12

2. Printer Operation

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

2.1

Operator panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

2.2

Function keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

2.3

Liquid Crystal Display (LCD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4

2.4

Load print medium . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5

2.5

Menu mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5

2.5.1 To confirm a macro selection and save the settings . . . . . . . . . . . . . . . . . . . . . 2-6

2.6

The use of 

PR 9

 emulation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6

3. Configuring the Printer

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

Main Functions and Entry Points into the Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

3.1

What is Configuring

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2

3.2

Standard Configuration

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3

3.2.1 Explanation of the Printout on the Previous Page . . . . . . . . . . . . . . . . . . . . . . 3-4

3.3

Menu Structure

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4

3.3.1 How to use the Key in the Menu Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5
3.3.2 The Emulations of 

PR 9

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5

3.4

Menu Setup Description

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5

3.4.1 Select Current Macro . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6
3.4.2 Select User to Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6
3.4.3 Configure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6
3.4.4 Olivetti Configure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9

Summary of Contents for PR9














































































































































































































































































Reviews:

No comments

Related manuals for PR9

Canon Sure shot 80 tele User Manual preview
Sure shot 80 tele
Brand: Canon Pages: 24
Canon iPF720 - imagePROGRAF Color Inkjet Printer Brochure & Specs preview
iPF720 - imagePROGRAF Color Inkjet Printer
Brand: Canon Pages: 8
Canon i475D Series Setup Instructions preview
i475D Series
Brand: Canon Pages: 2
JICCODA LE-1 Quick Install Manual preview
LE-1
Brand: JICCODA Pages: 46
Oki MPS480mb Manual De L'Utilisateur preview
MPS480mb
Brand: Oki Pages: 197
Canon PIXMA TR4720 Online Manual preview
PIXMA TR4720
Brand: Canon Pages: 542
Cashino EP-261B User Manual preview
EP-261B
Brand: Cashino Pages: 51
A&D MCP1000 Series Instruction Manual preview
MCP1000 Series
Brand: A&D Pages: 16
Xiamen Hanin Electronic Technology HM-A400 User Manual preview
HM-A400
Brand: Xiamen Hanin Electronic Technology Pages: 62
BIXOLON 275C - SRP Two-color Dot-matrix Printer User Manual preview
275C - SRP Two-color Dot-matrix Printer
Brand: BIXOLON Pages: 100
Xerox AltaLink B8045 Security Manual preview
AltaLink B8045
Brand: Xerox Pages: 70
Olympus U-5RES-ESD Instructions Manual preview
U-5RES-ESD
Brand: Olympus Pages: 16
OKIDATA Microline 393 Setup Manual preview
Microline 393
Brand: OKIDATA Pages: 44
Oki ML3320 User Manual preview
ML3320
Brand: Oki Pages: 57
Citizen CT-S310 User Manual preview
CT-S310
Brand: Citizen Pages: 3
FELIXrobotics FELIX 3.0 User Manual preview
FELIX 3.0
Brand: FELIXrobotics Pages: 65
Xerox VersaLink Series System Administrator Manual preview
VersaLink Series
Brand: Xerox Pages: 185
Xerox CopyCentre C65 Quick Reference Manual preview
CopyCentre C65
Brand: Xerox Pages: 150

Brands by name

Popular brands

Load more brands