Epson PR9, User Manual

Page: 226 / 269

Appendix D EPSON LQ-Emulation Commands
COMMAND HEX VALUE FUNCTION
D-5
ESC c n1 n2 1B 63 n1 n2 Ignored
ESC g 1B 67 Select 15-cpi for ASCII
ESC j n 1B 6A n Reverse paper feed
ESC k n 1B 6B n Select typeface
ESC l n 1B 6C n Set left margin
ESC p n 1B 70 n Turn proportional mode on/off
ESC q n 1B 71 n Select character style (Ignored)
ESC t n 1B 74 n Set/reset italic font
ESC w n 1B 77 n Set/reset double height
ESC x n 1B 78 n Set printing quality
FS SO 1C 0E Set double width in Chinese character (one
line)
FS SI 1C 0F Set Half-corner code for Chinese character
FS DC2 1C 12 Reset Chinese DBC Chinese character
FS DC4 1C 14 Reset double width in Chinese character on
one line
FS ! n 1C 21 n Set Chinese character attributes
FS & 1C 26 Set Chinese mode
FS - n 1C 2D n Set/reset underline in Chinese mode
FS . 1C 2E Set western mode
FS 2 … 1C 32 n1 n2 d1 ...
d72
Load user defined characters
FS D 1C 44 Set two half-corner characters into one
FS J 1C 4A Set clockwise 90°rotation printing for
Chinese character
FS K 1C 4B Cancel clockwise 90°rotation printing for
Chinese character
FS S n1 n2 1C 53 n1 n2 Set character space for Chinese character (
(n1*256 + n2)/180 inch)
FS T n1 n2 1C 54 n1 n2 Set character space for half-corner Chinese
character ( (n1*256 + n2)/180 inch)
FS U 1C 55 Set the width of half-corner Chinese
character to half of that for full-corner
Chinese character
FS V 1C 56 Set the width of half-corner Chinese
character equal to that for Western
characters
FS W n 1C 57 n Set/reset double-width and double-height
Chinese character
FS Y n1 n2 n3 1C 59 n1 n2 n3 Ignored