Epson PR9, User Manual

Page: 64 / 269

Configuring the Printer
3-36
3.7.5 DIRECTLY DUMP
The receiving data from the host will not stored first in the buffer of the printer. They will be
printed directly after being received by the printer.
Note:
The directly printed data are printed without the two bytes first . So there is no
indication of the length of the printed data.
Sample:
00000 07 0D 07 0D 07 0D 07 0D 07 0D 07 0D
& & & & & &
Key or action Two line display
Select Debug / Test
DEBUG/TEST
HEX PRINTING
[COMPRESS
y
]
until the LCD shows:
HEX PRINTING
DIRECTLY DUMP
[STOP
#
] to accept
The green Station 2 lamp is flashing.
HEX PRINTING
INSERT A4 SHEET
The printer starts printing vertical lines after inserting a paper. HEX PRINTING
PRINTING, WAITING...
After printing and eject the page the LCD shows:
HEX PRINTING
POWER OFF OR OTHERS
Note:
During the Directly Dump process, if the printer ejects paper automatically, it
indicate that the printing has been finished, but if the printer do not eject paper
automatically, press
[FEED/EJECT x ] key to eject the paper.
Caution:
The performance in the two different modes is different. In the Data Backup
Mode, the printer not only prints in HEX, but also execute the programmer
correctly (the bell will sound six times). But in the Directly Dump, the printer just
prints in HEX.