177
Troubleshooting
Stacker 4 full
The initialization operation cannot be performed because
Stacker 4 is full.
Remove the discs from Stacker 4.
Stacker 4 open
Close Stacker 4.
Stacker full
ST2,ST3,ST4
The disc cannot be ejected because the output stacker is full.
Remove the discs from the output stacker (Stacker 2,
Stacker 3, or Stacker 4).
Too many discs
ST1,ST2,ST3
Remove excess discs so that the height of the discs in the
indicated stacker is below the dotted red line of the stacker,
and then close the disc cover
.
Transferred disc
detection error
A disc could not be detected after transfer to a printer or drive.
Turn off the power, and then turn it on again.
If the same
error message still appears, repair is required. Please contact
Customer Support.
Wait a moment
and try again
Press the
button or CANCEL button.
Do not unlock the
disc cover repeatedly within a short time. Wait a moment before
unlocking.
Write error
Processing of the job is paused.
on page 180 in this guide, and after removing the cause of
the error, restart the job
. (See “Resuming jobs” on page 117 in
this guide for the job restarting procedure.)
Error Message
Remedy
Notification
Sound
