170
Maintenance
Precautions for Transporting Your Product
When transporting your product, be sure to use the original box and protective materials to protect it from an impact
or the like. See the
PP-100NII Setup Guide
for details on the handling of protective materials.
•
Make sure that no discs remain inside the product.
•
Never remove an ink cartridge currently in use. The print head may dry out, and printing
may become no longer possible.
•
When attaching protective materials or transporting the product, do not tilt the product or
turn it upside down. Make sure that it is oriented horizontally.
•
Be sure that the product is lifted by two people.
The weight of this product is approximately 26
kg. When this product is lifted, it should be
lifted on both sides by two people holding the
recesses on the sides as shown in the
illustration on the left. Holding any part other
than the ones indicated in the illustration on
the left when carrying the product may result in
damage to the product. In particular, carrying
the product while the disc cover, ink cartridge
cover, or Stacker 4 is open may result in the
product being dropped, or deformed and damaged.
Furthermore, when putting down this product, take care not to trap a finger between the
product and installation surface.
•
When lifting this product, make sure that, for example, you sufficiently bend your knees,
and your posture is such that excessive stress is not placed on your body.
An unnatural posture when lifting the product may result in an injury, or the product being
damaged.
•
When moving the product, do not tilt it 10 or more degrees in a forward or backward
direction, or a side direction.
The dropping or the like of the product may result in an accident.
•
Do not place a heavy object on the top of the product.
Subjecting this product to excessive force may result in a malfunction.
However, it is possible to place one unit of this product on top of another. In such a case,
make sure the tops and bottoms are oriented the same, and the exterior of the units are
aligned. At the same time, take sufficient care to prevent a unit from dropping or falling.
Also, do not place more than one unit on top of another.
