Epson PowerLite Pro G6050W, User Manual

Page: 40 / 270

• Connect the red and white plugs on the other end of the cable to the projector's Audio L-R ports.
Parent topic: Connecting to Video Sources
Related tasks
Connecting to an External Computer Monitor
Connecting to an HDBaseT Transmitter
To send an HDMI or RS-232C signal over a long distance, you can connect the projector to an optional
HDBaseT transmitter using a 100Base-TX network cable (PowerLite Pro G6750WU/G6800/G6900WU).
This is useful when you want to send a signal to or control the projector from a remote location, such as
in a hall or event site, since you can use a network cable up to 328 feet (100 m) in length. To ensure
proper data transmission, use a Category 5e STP cable or better.
1. Turn off the projector and HDBaseT transmitter.
Note: Make sure the projector and HDBaseT transmitter are turned off when connecting or
disconnecting a network cable between the two devices.
2. Connect one end of the network cable to the HDBaseT port on the transmitter.
3. Connect the other end to the projector's HDBaseT port.
40