50
4
Make sure
Clean Print Head
is selected, then
press . You see this message:
5
Press the
OK
button to begin cleaning the print
head. Cleaning takes about 40 seconds.
PictureMate makes some noise, and you see the
following message on the screen:
When cleaning is complete, you see a message
asking if you want to print a nozzle check pattern.
6
To make sure the nozzles are clean, load a sheet
of photo paper, then press
OK.
7
When you see the message, press
to print
the nozzle check.
8
Check the pattern to see if there are any gaps in
the lines.
9
If there are no gaps, press
Back
to go back to the
Maintenance menu.
If there are gaps, press
OK
to clean the print head
again. You may need to clean it two or three times
before the nozzles are cleared.
You can also turn PictureMate off and wait
overnight to allow any dried ink to soften. Then try
cleaning the print head again.
Note:
You can run a nozzle check before you clean the print
head. Follow steps 1 and 2 on page 49. Then select
Nozzle
Check
.
OK
Needs
Cleaning
Summary of Contents for PictureMate
Page 77: ...76 ...