Installing the software using Windows 95 plug-and-play
function
Follow these steps to install the printer software using
Windows 95 plug-and-play capabilities.
Note:
To install the printer software using Windows 95 plug-and-play
capabilities, your computer’s parallel port must be an IEEE-1284
compatible, bidirectional parallel port. See your computer
documentation for more information.
1. Make sure the printer is connected to the computer’s parallel
port.
2. Turn off your printer and computer, if necessary.
3. Turn on the printer first; then turn on the computer. Your
computer begins loading Windows 95.
4. If you defined a password, enter it at the prompt. You see the
New Hardware Found screen.
Note:
If you do not see the New Hardware Found screen, please follow
the procedure under “Installing the software for Windows 95” on
page 2-13 instead.
Make sure your printer
name is displayed.
hard01
2
R
+ Ref. Guide
Rev.c
A5 size
Chapter 2
03-04-97
DR, pass 0
Setting Up the Printer
2-15
Summary of Contents for P870C
