Printing starts too high or too low on the page.
Cause
What to do
Margins are set incorrectly in
your application.
Check that the margins are set
correctly in your program. See
“Printable area” in the Appendix.
The size of the paper loaded
in the printer does not match
the paper size setting within
your application.
Load the correct size of paper, or
change the paper size settings within
your application to match the size of
the paper you are using.
Print speed is not what you expect.
Cause
What to do
The image resolution and the
amount of color used in the
document may be too high.
Carefully considering your use of
color and resolution can help you
optimize your printing times. For
more details, see “Increasing the Print
Speed” later in this chapter.
Note:
High resolution printing and color
printing significantly increase the amount
of data to be processed. These two factors
have the greatest effect on print speed.
The print head moved to the ink cartridge replacement
position unexpectedly.
Cause
What to do
The
T
cleaning button was
pressed while the
V
ink out
light was flashing or on.
The ink cartridge is low or out of ink.
Replace the ink cartridge as described
on page 5-2.
L
+ Ref. Guide
Rev.c
A5 size
Chapter 6
03-04-97
DR, pass 0
6-10
Troubleshooting
Summary of Contents for P870C
