Attaching the Paper Support
Insert the paper support into the central slot at the rear of the
printer as shown below.
Choosing a Place for the Printer
Follow the guidelines listed below when selecting a location for
your printer.
❑
Place the printer on a flat, stable surface. The printer will
not operate properly if it is tilted or at an angle.
❑
Place the printer close enough to the computer for the
interface cable to reach it easily.
❑
Leave enough room on the table at the front of the printer
for the paper to flow freely out of it.
❑
Leave adequate room for easy operation and maintenance.
❑
Avoid using or storing the printer in places subject to rapid
changes in temperature and humidity. Also keep it away
from direct sunlight, strong light, or heat sources.
07
2
R
+ Ref. Guide
Rev.c
A5 size
Chapter 2
03-04-97
DR, pass 0
Setting Up the Printer
2-3
Summary of Contents for P870C
