Using Bi-D Adjustment
Making adjustment with Bi-D Adjustment
This utility tool allows you to make adjustment when you find a misalignment in vertical line.
Making adjustment with Bi-D Adjustment
To make Bi-D Adjustment, follow the steps below.
Caution:
Do not turn off the printer while the printer is printing adjustment pattern. Doing so may cause the
printer to store incorrect settings. If you turned off the printer during the adjustment process, restart
Bi-D Adjustment again.
Do not turn off Packet Mode setting.
Network connection is not supported.
Make sure that the printer’s status is ready before making Bi-D Adjustment.
If Bi-D Adjustment is not printed properly, set the printer’s font setting to default and try again.
Open the
Utility
menu, then click the
Bi-D Adjustment
icon. To find out how to open the
Utility
menu, see
. The Bi-D Adjustment window appears.
Click
Next
.
Click
. The printer prints three sets of adjustment pattern.
Look at the adjustment patterns and find the vertical line that is aligned the best. Then, select the corresponding line
number in the Bi-D Adjustment window.
Click
Set
. The adjustment pattern will be stored in the printer.
