manualshive.com logo in svg

Epson LQ-860 - Impact Printer, User Manual

Product Information: The Epson LQ-860 is a top-notch impact printer designed to meet all your printing needs. With its high-quality performance and user-friendly features, it ensures seamless operation for both personal and professional use. Download the free user manual from manualshive.com to unlock its full potential effortlessly.

Share
Download
background image

User-defined Characters

With this printer, it is possible to define and print characters of your

own design. You can design an entirely new alphabet or typeface,

create special characters for use as mathematical or scientific

symbols, or create graphic patterns with user-defined characters to

serve as building blocks for larger designs.
Below, you can see samples of typefaces created with the user-

defined character function.

You can make the task of defining characters easier by using a

commercial software program that assists you in creating characters

or simply supplies you with sets of characters already created. Also,

some popular software programs make use of the printer’s user-

defined character function to enhance printouts. (These characters

are called download characters in some programs.)
The standard ASCII characters are stored in the printer’s Read Only

Memory (ROM) or optional Multi-Font Module, and the user-

defined characters are stored in the printer’s Random Access

Memory 

(RAM).

Designing Your Characters

User-defined characters are like dot graphics because you send the

printer precise instructions on where you want each dot printed. In

fact, planning a user-defined character is like planning a small dot

graphics pattern.

Software and Graphics

4-19

Summary of Contents for LQ-860 - Impact Printer






































































































































































































































































































































Reviews:

No comments

Related manuals for LQ-860 - Impact Printer

3Com 3C19250 - USB Ethernet Network Interface... User Manual preview
3C19250 - USB Ethernet Network Interface...
Brand: 3Com Pages: 16
Novell IFOLDER 3 - ADMINISTRATION Manual preview
IFOLDER 3 - ADMINISTRATION
Brand: Novell Pages: 148
Eaton Network Shutdown Module V3 User Manual preview
Network Shutdown Module V3
Brand: Eaton Pages: 65
Xerox 701P91273 Installation Manual preview
701P91273
Brand: Xerox Pages: 52
Novell ZENWORKS APPLICATION VIRTUALIZATION - V8.0.3 INTEGRATION AND STREAMING GUIDE Manual preview
ZENWORKS APPLICATION VIRTUALIZATION - V8.0.3 INTEGRATION AND STREAMING GUIDE
Brand: Novell Pages: 36
Novell ZENworks 10 Configuration Management Upgrade Manual preview
ZENworks 10 Configuration Management
Brand: Novell Pages: 32
Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - 07-20-2009 Installation Manual preview
ZENWORKS LINUX MANAGEMENT 7.2 IR2 - 07-20-2009
Brand: Novell Pages: 134
Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - COMMAND LINE UTILITIES REFERENCE 10.3 30-03-2010 Reference Manual preview
ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - COMMAND LINE UTILITIES REFERENCE 10.3 30-03-2010
Brand: Novell Pages: 200
Novell OPEN WORKGROUP SUITE SMALL BUSINESS EDITION 2.0 Administration Manual preview
OPEN WORKGROUP SUITE SMALL BUSINESS EDITION 2.0
Brand: Novell Pages: 77
Novell LINUX ENTERPRISE REAL TIME 10 SP1 Quick Start Manual preview
LINUX ENTERPRISE REAL TIME 10 SP1
Brand: Novell Pages: 7
Novell LINUX ENTERPRISE SERVER 10 - STORAGE ADMINISTRATION GUIDE FOR EVMS Administration Manual preview
LINUX ENTERPRISE SERVER 10 - STORAGE ADMINISTRATION GUIDE FOR EVMS
Brand: Novell Pages: 93
Novell OPEN ENTERPRISE SERVER 2 SP 2 - CLUSTER SERVICES 1.8.7 FOR LINUX Manual preview
OPEN ENTERPRISE SERVER 2 SP 2 - CLUSTER SERVICES 1.8.7 FOR LINUX
Brand: Novell Pages: 254
Novell LINUX ENTERPRISE DESKTOP 10 Quick Manual preview
LINUX ENTERPRISE DESKTOP 10
Brand: Novell Pages: 9
Novell IFOLDER 3.6 - SECURITY ADMINISTRATION Manual preview
IFOLDER 3.6 - SECURITY ADMINISTRATION
Brand: Novell Pages: 22
Novell LINUX ENTERPRISE 11 - SUBSCRIPTION MANAGEMENT TOOL GUIDE 10-02-2009 Manual preview
LINUX ENTERPRISE 11 - SUBSCRIPTION MANAGEMENT TOOL GUIDE 10-02-2009
Brand: Novell Pages: 236
Novell GROUPWISE 7 - MULTI-SYSTEM ADMINISTRATION Manual preview
GROUPWISE 7 - MULTI-SYSTEM ADMINISTRATION
Brand: Novell Pages: 75
TRENDnet VIP-L16 - Installation Manual preview
VIP-L16 -
Brand: TRENDnet Pages: 21
Navman SPiN 100 User Manual preview
SPiN 100
Brand: Navman Pages: 52

Brands by name

Popular brands

Load more brands